CAKEWALK sonar x3, Reference Manual

Page: 1907 / 2094

1907
Missing MIDI Ports dialog
See:
“To insert a send to an existing bus” on page 897
“To insert a send to a new stereo bus” on page 898
“To insert a send to a new surround bus” on page 898
“To insert a send to a new effect bus” on page 898
“To insert a send on multiple tracks simultaneously” on page 899
Missing MIDI Ports dialog
If any assigned MIDI output devices are missing when you load a project, which is likely to happen if
you transfer projects between different computers, the
Missing MIDI Ports dialog box appears.
The Missing MIDI Ports dialog box lets you remap missing output ports to available output ports.
Silent Buses Detected dialog
When you load a project, SONAR checks to see if the exact same output ports are assigned as
when the project was saved. SONAR’s port assignments can change if you load the project on a
different hardware configuration or change driver models. If there is any discrepancy between the
port assignments that were saved and the ports that are used in the current configuration, the ports
are set to “None” and the
Silent Buses Detected dialog box displays all track and bus outputs from
the current project that have been assigned to a silent output.
The
Silent Buses Detected dialog box also appears if any track or bus output is assigned to “None”
as a result of changing the audio configuration.
See:
“Changing I/O devices” on page 64
“Configuring your sound device” on page 104
“Assigning Inputs & Outputs” on page 221
Note: If you do not remap a missing device, the track’s Output control will display MISSING:
<name of missing device> . If the missing device becomes available in the future, the track will
automatically be assigned to the correct device.