CAKEWALK sonar x3, Reference Manual

Page: 1380 / 2094

1380
Troubleshooting
I get a Burn Error or No Drive is Detected error when burning a CD directly from
I get a Burn Error or No Drive is Detected error
when burning a CD directly from SONAR
1. Start SONAR and open the project you are attempting to burn to a CD.
2. Go to Edit > Select All to select the entire project.
3. Go to File > Export Audio to open the Export Audio dialog box.
4. Set Sample Rate to 44100 .
5. Set Bit Depth to 16 .
6. Type a name in the File name field.
7. Select the Add to Audio CD Track List check box.
8. Click Export .
9. Go to Utilities > Burn Audio CD .
If you receive burning errors or your CD-R/W drive isn't recognized under Target Drive , try the
following
• Make sure the
Burn Speed setting in Audio Creator matches the CD-R/W or DVD-R/W settings in
Windows. To do so:
a) Go to My Computer, right-click on the CD/DVD-R/W drive and click Properties .
b) Click the Recording tab and select the correct Burning Speed setting.
c) Make sure the Enable Recording on this Drive check box is select.
d) Repeat steps 1 - 9.
More “Frequently asked questions” on page 1364.