Cajun P220G, Configuration And Operation Manual

Page: 89 / 135

Monitoring the P220G Gigabit Switch
7-8 Cajun P220G Switch Configuration and Operation Guide
Table 7-5. Event Destinations
& *
Each P220G switch provides two logs of switch system activity:
❒
Event Log - stores a large table of events. The size of the table is user-settable.
Because these events are stored in switch memory, the list is cleared each time the
switch reboots.
❒
Shutdown Log - stores the same information as the Event Log, but generally in a
smaller table because the table is stored in the switch’s non-volatile RAM
(NVRAM). This log list is particularly useful in assessing the cause of a switch
failure, because the information is retained even after the switch restarts.
To view the logs, complete the following steps:
1. Select either Event Log (Figure 7-5) or Shutdown Log (Figure 7-6) from the
menu on the left side of the Web Agent.
Figure 7-5. Event Log
.
Log Event entry sent to event and shutdown
logs.
Trap Trap message (event notification) sent to
designated trap receivers.
Console Sends the event information to the console
connected at the switch front panel,