Managing Address Forwarding Tables
5-2 Cajun P220G Switch Configuration and Operation Guide
& &
To change the aging values for all instances of the address table, complete the following
steps:
1. Select Table Configuration from menu on the left side of the Web Agent. The
Address Forwarding Table Configuration screen displays (Figure 5-1):
Figure 5-1. Address Forwarding Table Configuration Screen
.
2. Change the Age Time by entering a new value in the Age Time field. The default
of 300 seconds is the recommended default. Aged out addresses become invalid
until the switch sees another packet with the aged out entry’s source address or
until the address is aged-out by the super age timer (in which the entry is deleted
from the address table).
3. Change the Super Age Time by entering a new value in the Super Age Time field.
The Super Age Timer marks all invalid table entries, then checks to see if they
remain invalid for the specified super age interval. This helps to clear the table of
entries that are no longer used.
4. Click APPLY to make the changes. Click CANCEL to return the display to the
current switch settings.
Summary of Contents for P220G
