Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------
----------------------------------------
Tel:+86 592 5901215
web: en.caimore.com
51
51
when browsing the page.
4.4.5 GPS Function
GPS function is to configure GPS data center address and port, enabling snmp
function, GPS data will be sent to the snmp server. When initiative report is
unable,center address terminals can send AT command to the device which captures
the specified GPS data,when initiative report is enabled, the device can GPS data
content to center address during the set reported interval.
Picture 4-5-6
Enable GPS:
Enable:
Enable GPS function.
Disable:
Disable GPS function.
Center address and port :
set center address and port.
Agreement:
TCP:
TCP protocol which interact with data center
UDP:
UDP protocol which interact with data center.
Whether the initiative to report:
Yes:
Initiative to report GPS data to a central address.
No:
Not initiative to report the GPS data to a central address.
Device ID
: The user-defined gateway’s mark.
Custom registration package:
the user-defined registration package .
The uploaded GPS data options:
Open the initiative to report, choose GPS data
content uploaded to the central address.
GGA, GLL, GSA, GSV, RMC, VTG, ZDA the data contents, see Appendix 7.
Note:
Not the initiative to report then,to receive AT command description.
Get Coordinates: AT + LOCATE:
Re: Lon = 118.176565; Lat = 24.493771; (Lon =
