CAI 600-NDIR, User Manual

Page: 82 / 86

Section 12 Model 601/601P/602/602P/603 NDIR Analyzer
California Analytical Model 600_NDIR_Series_v10.0 CE Operators Manual
Page 82 of 86
12.5.9. SARE: Auto range on
Command Response Description
_SARE_K0 _SARE_s Set auto range on for all channels
_SARE_Km _SARE_s Set auto range on for channel m
12.5.10. SARA: Auto range off
Command Response Description
_SARA_K0 _SARA_s Set auto range off for all channels
_SARA_Km _SARE_s Set auto range off
12.5.11. SREM: Remote mode for AK-commands
Command Response Description
_SREM_K0 _SREM_s Set device in remote mode
12.5.12. SMAN: Manual control to control device manually
Command Response Description
_SMAN_K0 _SMAN_s Set device in manual mode
12.5.13. SMGA: Start measuring
Command Response Description
_SMGA_K0 _SMGA_s Start measuring
Open all sample valves
_SMGA_Km _SMGA_s Open sample valve of channel m
12.5.14. SNKA: Saves measured value as new offset.
Command Response Description
_SNKA_K0 _SNKA_s Saves measured value of actual range
for each channel as new offset if zero
valve is opened
_SNKA_Km _SNKA_s Saves measured value of actual range
as new offset if zero valve is opened
12.5.15. SEKA: Saves measured value as new span value
Command Response Description
_SEKA_K0 _SEKA_s Saves new span values for each
channel if span valve is opened
_SEKA_Km _SEKA_s Saves measured value of actual range
as new span value if span valve is
opened
12.5.16. SUDP: Start /Stop UDP data streaming
Command Response Description
_SUDP_K0_ON _SUDP_s Start Data streaming via the UDP
channel. You need to configure the
channel before with EUDP command
_SUDP_K0_OFF _SUDP_s Stop streaming via the UDP channel