Section 7
Model 601/601P/602/602P/603 NDIR Analyzer
California Analytical Model 600_NDIR_Series_v10.0 CE
Operators Manual
Page 43 of 86
7.5.9. F4
Alarms
Error reports are always displayed in the lowest line of the screen. There are two
pressures, three temperatures, one concentration, and two voltages with alarm limits that
can be defined. The user can define the range limits and, if exceeded, will display an
error-message.
Figure 7-23 Alarm screen I
Figure 7-24 Alarm screen II
Set Temperature Alarms Set Concentration, Pressure and Voltage Alarms
7.5.10. F5
Password
After turning on the analyzer, you are in access level 1. To change the access level or to
change the passwords, press F5 (Setup) in the main menu and Press F5 (Password)
again. The following screen appears:
Figure 7-25 Enter / Change Password
Summary of Contents for 600-NDIR
Page 1: ......
