89
Adjusting the CS to the rider/sitting position
Before you use your CS for the first time, you should adjust the sitting po-
sition to suit your body size or have it adjusted. Only then will you be able
to ride safely and in comfort.
As these works require know-how, experience, appropriate tools and a
certain amount of skill, you should restrict yourself to adjusting the sitting
position. Ask your Ca Go dealer for the correct sitting position or if you
want something changed. He will see to your wishes the next time you
leave your CS at the workshop, e.g. for the first inspection.
After any adjustment/assembly work, be sure to make a short functional
check as described in the chapter
“Before every ride with the CS”
and do a
test ride with your CS in an area free of traffic.
Warning
All tasks described in the following require the know-how of a mechanic
and appropriate tools. Make it a rule to always tighten bolted connections
with great care. Increase the torque values bit by bit and check the fit of
the component in between. Use a torque wrench and do not exceed the
maximum torque values! You find the torque values on the components
themselves, in the chapter
“Recommended torque values”
or in the possibly
enclosed instructions of the component manufacturers. Alternatively, you
find them in the download area on the websites of the respective compo-
nent manufacturers.
