126
Suspension fork
Your CS is equipped with a suspension fork (Fig. 138). The strain on you
and your CS caused by the mechanical shocks are noticeably reduced.
Fig. 138
Safety instructions
Read the instructions of the suspension fork manufacturer carefully before
making any changes to the fork adjustment or doing maintenance work. You
find more information at: www.srsuntour.com
Adjusting the spring rate
To work perfectly, the suspension fork has to be adjusted to the weight,
the sitting posture and the intended use. The suspension fork should yield
by about 10-25 % of its total travel (sag) under the rider’s weight.
Be sure to have this adjustment carried out by your Ca Go dealer at the
moment of delivery.
If you can hear the fork hit the end of its travel in the terrain or on poor
road surfaces, the spring is adjusted too soft. The pressure must be in-
creased.
