Cagiva Navigator, Workshop Manual, Page: 353 / 407

G.16
ELECTRICAL EQUIPMENT
+ -
COMMUTATOR
Check to see if the connector is discoloured, abnormally worn or if
the height A is insufficient.
Substitute the rotor if the commutator is abnormally worn. If the sur-
face is discoloured, brighten it with emery paper and clean it with a
dry cloth.
If the incision is not deep enough, cut the isolator 1 with a metal
cutting saw.
ROTOR WINDING CHECK
Check the continuity between each segment.
Check the continuity between each segment and the rotor shaft.
If there is no continuity between the segments or between the seg-
ments and the rotor, substitute the rotor.
Circuit tester dial indication: Continuity test ( •
)
)
) )
OIL SEAL CHECK
Check to see if the oil seal edges are damaged or if there are leak-
ages.
If damage is found, substitute the cover of the housing.
STARTER MOTOR REASSEMBLY
Reassemble the starter motor in the reverse order of disassembly.
Be careful of the following points:
Substitute the O-ring to avoid oil leaks and the entrance of
humidity.
• Apply grease to the edge of the oil seal.
Specified product: AGIP GREASE 30.
• Apply a small quantity of MOLIKOTE to the rotor shaft.
Segment