Cagiva Navigator, Workshop Manual

Page: 32 / 407

B.24
MAINTENANCE
• To change the rear brake pads, proceed as follows:
• Remove the two screws of the rear spray guard 3 rotate it as shown
in the figure.
Substitute the pads in pairs to guarantee maximum brak-
ing performance..
BRAKE PEDAL HEIGHT
The rear brake pedal must have a travel of 10-15 mm before the
braking action takes place. If it is necessary, make the adjustment as
follows:
- Slacken the nut 5;
- Using nuts 6 or 7, position the pedal in the desired position.
- When the adjustment is completed, tighten the nut 7.
Torque pressure
Rear brake pedal locknut 1: 18 N.m (1.8 kg-m)
MAINTENANCE
To change the rear brake disc pads, proceed as follows:
- Remove the 2 screws 1 of the rear mudguard 2 and rotate it as
shown in the figure.
- Remove the pincer assembly from the forks by unscrewing the
2 relative screws 3.
- Remove the 2 pins 4 that keep the pads in place.
Proceed with checking the pads for wear in the same way as for
the front brake pads.
Reassemble everything in the reverse order of removal.
3
1
7
6
5
2
1
4
1
3