16
BDC2010 General Operating Instructions
Make sure the stirrer is securely mounted as specified in the installation
instructions . ensure the mixing paddle or impeller is securely attached to the
desired position .
The stirrer is now ready for use to mix liquids and liquid/solid solutions .
Appropriate impeller and container specifications must be determined by the
operator, ensuring that all safety instructions are followed .
Keypad Functions
Power Button - Turns the stirrer on and off .
Multi-Function Button – sets three parameters - speed (rpm),
countdown timer (minutes) and
x
R
x
agitation (seconds)
Increase Button - Increases the speed by one rpm or the countdown
timer by one minute or the
x
R
x
agitation by one second .
Decrease Button - Decreases the speed by one rpm or countdown
timer by one minute or the
x
R
x
agitation by one second .
Reverse – Reverses the direction that the impeller is turning . The
impeller turns clockwise by default .
start/Pause Button – Allows the stirrer to be paused and started again .
Use this button to start the stirrer when ready .
light Power Button - Turns the light on and off . The stirrer must be
plugged in for the light to function .
Four Digit leD Display – Displays either the speed (rpm),
countdown timer (minutes) or
x
R
x
agitation (seconds) . The four
decimal points are used to indicate the following parameters . These
do not act as numeric decimal points .
j
indicator that speed is displayed
k
indicator that time is displayed
l
indicator that cycle time is displayed
indicator that stirrer is turning counter clockwise
•
During set-up the indicator light is solid . When the stirrer is
running, the indicator light flashes .
j k l
