background image

TOTAL LITE Revision 1

SERVICE MANUAL FOR INNOVATION

 

TOTAL LITE

 

Single-Cup Brewer

 

50

8.5 

Automatic Rinsing Function

To use the auto rinse function press the rinse text box and follow the instructions that will appear on the 

screen.

WARNING! make sure to place a container large enough (size is specified 

on the screen) . BE CAREFUL because water is VERY HOT!

8.6 

Exterior Cleaning

Frequency: Daily 

To minimize scratching and preserve appearance, we recommend using a clean damp sponge or soft 

cloth lightly treated with a nonabrasive detergent for cleaning the exterior of the unit and the base cabinet. 

After removing all food soils, thoroughly dry with a clean, soft cloth.

Non food-contact parts to be verified and wiped clean

Metal Top Cap

Stand (optionnal)

Metal Cabinet
Plastic Door

Exterior parts requiring additional cleaning instructions 

(see below)

Drip Tray
Waste Bin

 

Parts for this brewer are 

NOT

 dishwasher safe!

8.6.1  Cleaning the drip tray

Frequency: Daily or as needed

The drip tray is not hooked up to a drain therefore it should be inspected and emptied periodically. Use 

caution and keep it level to avoid spilling. Remove the drip tray by simply lifting gently and pulling it out 

from underneath the door. Rinse both parts under water and dry thoroughly with a clean dry cloth or 

towel. Reinstall the drip tray onto the brewer and make sure that it is stable.

 

 

WARNING, drip tray may be full of HOT liquid! 

Cleaning & Sanitizing

Summary of Contents for TOTAL LITE









































































Reviews: