INNOVATION TOTAL LITE Rev. 11 05/2018
61
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL for Innovation Series’ Total Lite
C
le
an
in
g
an
d
San
it
iz
in
g
7.6.3 Waste Bin
Frequency: daily or every 200 cycles*
After each coffee cycle, the spent grounds and used filter paper are automatically
discarded into the waste bin. To prevent the bin from overflowing, an automatic function
disables coffee-based beverages and displays the following message on the screen:
Maximum setting = 400
Minimum setting = 0
Setting the maximum counter to zero (0) disables the automatic function and may
cause an overflow issue if the waste bin is full.
The equipment will not dispense coffee beverages until the bin is emptied and the counter
is reset. The counter can be reset and adjusted in accordance to the size of the waste bin
in the Systme1 subtab, under the System tab in Service mode (see section 6.6.1).
How to empty the cabinet waste bin
1. Open the cabinet door, below the brewer.
2. Open the brewer’s door and remove the front panel.
3. Cut the filter paper 4" below the brew group with scissors or tear gently.
DO NOT
YANK ON THE PAPER!
4. Remove the filled garbage bag from the waste bin and replace it with a new one.
5. Access Service mode and press the "Reset Waste Bin" button.
6. Replace the front panel and close the doors.
How to empty the brewer’s internal waste bin
1. Open the brewer’s door.
2. Take off the front panel.
3. Cut the filter paper 4” below the brew group with scissors or tear gently.
DO NOT
YANK ON THE PAPER!
4. Emptied the waste bin.
5. Access Service mode and press the "Reset Waste Bin" button.
6. Replace the front panel and close the door.
It is very important not to yank on the filter paper.
Doing so may result in a malfunction of the machine.
When using the internal waste bin provided with the unit, Cafection recommends
setting the counter to 25 cycles using standard 8, 10 and 12 oz cups.
