INNOVATION TOTAL LITE Rev. 11 05/2018
www.cafection.com 800-561-6162
60
SERVICE & INSTALLATION MANUAL for Innovation Series’ Total Lite
7.5
Overall Cleaning
The brewer and its area must be clean and tidy at all time. Both inside and outside of the machine
must be inspected upon each service visit and cleaned when needed. Make sure the unit is clean,
safe and functioning after it has been serviced.
7.6
Exterior Cleaning
Frequency: daily
To minimize scratching and preserve a neat appearance, Cafection recommends using a clean
damp sponge or soft cloth. Use a nonabrasive detergent to clean the exterior of the unit and the
base cabinet. After removing all food soils, thoroughly dry with a clean, soft cloth.
Non food-contact parts to be verified and cleaned
- Plastic top lid.
- Cabinet (optional).
- Metal surfaces.
- Plastic door.
- Drip Tray.
- Waste Bin.
Parts are NOT dishwasher safe.
7.6.1 Touch Screen
Frequency: daily or as needed
WARNING! Use a 100% cotton soft cloth only.
7.6.2 Drip Tray
Frequency: daily or as needed
The drip tray is not plugged to a drain. Therefore it should be inspected and emptied
periodically.
WARNING! Drip tray may be full of HOT liquid.
To remove the drip tray, lift it gently to avoid spilling and pull it out from underneath the
door. Rinse the drip tray and dry it with a clean dry cloth. Reinstall the drip tray and make
sure it is stable and leveled.
C
le
an
in
g
an
d
San
it
iz
in
g
