INNOVATION TOTAL LITE Rev. 1 2021-10
43
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL for Cafection’s Total Lite
S
e
rv
ic
e Mo
d
e
6.5.3 Brew Cycles Settings Sub Tab
1. This table is used to set the brew
cycles and extra grind time. Press
on the quantity to modify it and enter
the desired number of units using the
numeric keyboard.
2. This button is used to bring all brew
cycles values back to factory settings.
3. These buttons are used to discard or
save any current modification.
Press on the "Save" button before changing tab to keep the modifications.
The Total Lite has four (4) different brew cycles. The brew cycle is automatically selected in
accordance with the coffee and water quantities in the coffee-based recipe.
Cycle #1 (101 to 187 water units)
Standard brew cycle.
Cycle #2 (188 to 269 water units)
Three (3) stirring cycles during which the total quantity of water is dispensed in three (3)
shots. The mix is stirred three (3) times, ensuring that the coffee completely comes into
contact with water. Ideal for recipes with high water and coffee volumes.
Cycle #3 (270 water units and more)
Double brew cycle. The machine splits the water and ingredients quantities in half to
perform two (2) separate brew cycles.
Cycle #4 (100 water units or less)
Quick brew cycle. Ideal for recipes with low water level.
Adjustable Settings
Extra Grind Time
The grind time is automatically calculated in accordance with the quantity of coffee grounds
set in the recipe. Older grinders might not grind all the beans. Therefore, extra grind time
may be added using these fields.
20 units = 1 second. Default setting: 0.
Pause 1
First contact time between water and coffee grounds. To get more extraction, increase this
value.
20 units = 1 second.
Pause 2
Second contact time between water and coffee grounds. To get more extraction, increase
this value.
20 units = 1 second.
Move 3
Position where the piston stops before dispensing the coffee into the cup.
A setting too high will prematurely open the brew chamber, causing a mess of wet
coffee grounds inside the machine.
A setting too low will not pull all coffee through the filter.
This setting must be changed with care.
1
3
2
