INNOVATION TOTAL LITE Rev. 1 2021-10
41
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL for Cafection’s Total Lite
S
e
rv
ic
e Mo
d
e
6.5.2 Recipes Information Sub Tab
1. This drop-down menu is used to choose the recipe needing to be modified. Coffee 1,
2 and 3 refer to bean hopper sections 1, 2 and 3 (from left to right).
2. This field is used to set the recipe name that will be shown on the selection screen
under the beverage's illustration.
If the language of the system is changed, the name of the recipes will be reset to
factory settings.
3. This switch is used to add the "Pick Me" tag over the beverage on the selection
screen.
4. This checkbox is used to enable or disable the drink on the selection screen.
5. This section allows to use switches to enable or disable each size for the recipe.
Use the first text field to set the text displayed on the cup size buttons.
Use the second text field to set the price of the recipe for each size.
Get a sample of ingredients or the complete drink with the "Sample" button.
"
Get a Sample
"
Interface
A
These buttons are used to get a sample of all the dry ingredients of the tested recipe, in
the desired strength.
Make sure to place a container under ALL product dispensers
used for the tested recipe.
B
This button is used to get a sample of the recipe without the ingredients.
Make sure
to place a recipient large enough under the dispensing nozzle.
C
These buttons are used to get a sample of the entire recipe, in the desired strength.
Samples are not registered in the sales counters.
6. This button will show the message displayed during the screen saver for the recipe. The
text can only be edited with
Sophia
(Optimum License required).
A
B
C
1
2
7
8
9
10
11
3
4
5
6
