INNOVATION TOTAL LITE Rev. 1 2021-10
www.cafection.com 800-561-6162
16
SERVICE & INSTALLATION MANUAL for Cafection’s Total Lite
4.3 Unpacking
Each brewing equipment kit should include the following boxes: one (1) box for the brewer which
holds one (1) box for the hopper and accessories. Small accessories are in the internal waste bin,
inside the machine.
To remove the unit from the box, carefully cut the straps holding the box in place on the skid. Open
the top of the box. Take the accessories box out and remove the unit box by lifting it. Inspect the
unit to see if any damage has occurred during shipment.
The parts and accessories that are shipped separately need to be installed on the equipment. Here
is a list of all accessories and their location when packed.
In the hopper box:
1. Bean Hopper
In the internal waste bin:
2. Internal Waste Bin
3. Drip Tray Grill
4. Drip Tray
5. Cleaning Brush
6. Plastic Top Lid
7. Top Lid Fitting Part
8. 3/8'' Inlet Fitting
9. 3/8'' to 1/4'' Inlet Fitting
10. Gage Identification Stickers
11. Identification Tag for the
Bean Hopper
12. Filter Paper
13. Microfiber cloth
14. Keychain
15. Service & Installation Manual
16. Initial Setup Instructions
17. Grinder Protector Installation
Instructions
In an individual box (optional)
18. Plastic Chute Kit (Chute Base
and Chute)
One of the machine keys is attached to the power cord at the back of the
machine. A second key is taped on the filter paper roll, located in the internal
waste bin.
18
1
5
9
12
3
7
2
6
4
8
In
it
ia
l S
e
tu
p
