ENCORE VENTI Rev. 3 2021-10
www.cafection.com 800-561-6162
68
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
5. Rotate the lever screw clockwise to release the piston.
6. Push up the cylinder locking pin and pull the retaining bracket outward. At the same
time, pull the cylinder outward.
7. Pinch the funnel to remove it from the brew chamber.
8. Rinse all parts thoroughly under hot water to remove visible soil.
9. Air dry completely and follow steps in reverse order to reinstall parts.
10. Order a large coffee to ensure that the brew group is working properly.
The brew group assembly can also be cleaned using urn cleaner. See sections 7.2
and 7.3 for cleaning instructions.
Brew Group Assembly Sanitizing Treatment
Frequency: quarterly or every 5,000 cycles
Regular sanitation treatments of the brew group assembly prevent residue from affecting
the vacuum in the mechanism and altering the taste of the beverages. Please refer to the
sections 7.2 and 7.3 of this manual for sanitizing instructions.
7.8.6 Fan
Frequency: quarterly or as needed
Visually inspect the fan located directly to
the right of the hot chocolate canister and
clean if needed.
1. Turn off the unit and unplug it to stop
the fan.
2. Unplug the fan and remove the guard
to access the fan blades.
3. Wipe the fan clean with a dry
disposable towel.
4. Reinstall the guard, plug the fan and
the machine in and turn the brewer
back ON.
Fan
C
le
an
in
g
an
d
San
it
iz
in
g
