ENCORE VENTI Rev. 3 2021-10
www.cafection.com 800-561-6162
58
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
S
e
rv
ic
e Mo
d
e
6.9
General Reset to Factory Settings
Resetting the brewer back to factory settings will erase all personalized parameters. The
permanent counters, serial number, language, screen saver, maintenance data, gauges and
network data will remain unchanged.
Option 1
To perform a general reset of the brewer, press in the top right corner of the selection screen and
hold for eight (8) seconds. Then, follow the instructions on the screen.
This step does not work in Service mode.
Option 2
Open the brewer door and access the buttons inside the door.
Counting from left to right, slowly press the black buttons in that specific order: first (1
st
), fifth (5
th
),
then fourth (4
th
). A window will pop up to confirm the reset.
See section 6.6.1 to reset the Settings sub tab, under System tab, back to factory
settings without affecting the recipes.
See section 6.5.2 to reset all recipes back to factory settings.
See section 6.5.3 to reset all brew cycles back to factory settings.
8s
