Cafection Encore lite Service & Installation Manual Download Page 46

Page: 46 / 85

ENCORE LITE Rev. 3 05/2018

www.cafection.com 800-561-6162

SERVICE & INSTALLATION MANUAL for Cafection's Encore Lite

e Mo

6.6.3 Tools Sub Tab

1. This button is used to calibrate

the screen. Follow the calibration
procedure shown on the screen.

2. This button is used to set the time

and date of the brewer.

It is important to set the time
and date to ensure the proper
functioning of the following:
- Service Log.
- Email Alerts.
- Sophia - Global Management
System.
- Error Log.

3. This button is used to view the coin changer status.

If there is no coin changer in the machine or if it

not plugged correctly, this button will not be visible.

4. This button is used to enter Manual Control mode and manually test the machine

components.

Warning! This mode is intended for advanced technicians. Risk of damages to the

machine or injuries.

5. This button is used to view the card reader status.

If there is no card reader in the machine or if it is not plugged correctly,

this button will not be visible.

6. This button is used to configure the coffee brewer during the initial setup. It provides

installation tips and requirements.

Summary of Contents for Encore lite






















































































Search results

Summary of Contents for Encore lite

Reviews:

Related manuals for Encore lite

Brands by name

Popular brands

Cafection Encore lite, Service & Installation Manual

Search results

Summary of Contents for Encore lite

Reviews:

Related manuals for Encore lite

Brands by name

Popular brands