caenrfid qIDmini R1170I, User Manual

Page: 46 / 77

OFFLINE PROFILE - qIDmini Technical Information Manual 46
ERASE
Hold down the trigger button to enter this option and to delete the stored data. The text “ Erase ” on the
display starts blinking. Once the data is deleted, the device returns to the main menu.
VIEWTAG
This option shows the list of the read tags during the last scan. Hold down the trigger button to enter this
option. Then press quickly the trigger button to scroll the EPC code of the read tags.
BTSCAN
The BTSCAN option is used to identify the Bluetooth device for the download of stored data.
The BTSCAN searches for the active Bluetooth devices within the read range of the reader.
To activate the discovery of active Bluetooth devices, hold down the trigger button. After about 5 seconds,
the reader shows the list of active Bluetooth devices.
To scroll through the active Bluetooth devices list, press quickly (1 time) the trigger button.
To return to the main menu, quickly press the power button.
The currently Bluetooth device is marked with an asterisk.
You can activate only one Bluetooth device at a time.
To activate a different Bluetooth device, scroll through the list by pressing quickly the trigger button until
the desired Bluetooth device and then hold down the trigger button for a few seconds: the name of the
Bluetooth device will begin to flash. Once activated, the device returns to the main menu.
LOGOPT
Hold down the trigger button to enter the Log Option:
1. TIMESTP: Time Stamp permits to associate date and time to the EPC of the read tags. The associated
timestamp is downloaded with the EPC list. To enable/disable the TimeStp, hold down the trigger
button for a few seconds. The enable (or disable) option will begin to flash. Once activated, the
device returns to the main menu.
The currently active state is marked with an asterisk. By default the TimeStp option is disabled.
DISPLAY
Hold down the trigger button to enter the Display Option:
1. SCROLL: The EPC code is shown on the display and, if longer than the maximum display length, the
flowing text permits to show the entire code. To enable/disable the display scroll, hold down the
trigger button for a few seconds. The chosen option will begin to flash. Once activated, the device
returns to the main menu.
The currently active state is marked with an asterisk. By default the display scroll is disabled.
If the display scroll is disabled, the display shows the last 8 characters of the tag EPC.