Caen RFID Slate R1260U, Technical Information Manual

Page: 15 / 23

EXTERNAL INTERFACES DESCRIPTION – Slate Technical Information Manual 15
3 EXTERNAL INTERFACES DESCRIPTION
External Connection
The external connection is via USB port.
The USB cable is located in the back side of the Slate. You can pass the USB cable through the opening at the bottom or
at the top of the Slate back side. The mechanical specification of the USB Port is as follows:

USB Port: USB Type A plug connector
The Slate R1260U/UB is powered through the USB host.
Front Panel LEDs
The Slate R1260U/UB front panel houses the following LEDs (see figure below):
LED FUNCTION TYPE
POWER Power ON Green LED
TAG-ID Tag detection Blinking Red LED
TX/RX USB communication activity Blinking Yellow LED
Tab. 3.1: Slate R1260U/UB Front Panel LEDs
Fig. 3.1: Slate R1260U/UB Front Panel LEDs