F1K5-DISS – User’s Manual
11
2.3
Mounting
The FAST-PS-1K5 & F1K5-DISS system can be used either as a desktop unit or
as a rack-mount device since the unit form factor is designed to be installed in a standard
3U 19-inch cabinet.
This system is fan cooled, the air intake is at the front panel
and the exhaust is at the rear panel. Upon installation allow
cooling air to reach the front panel ventilation inlets. Allow
minimum 10 cm of unrestricted air space at the front and 20
cm on the rear of the unit.
Rack Mounting
The FAST-PS-1K5 & F1K5-DISS system is designed to fit in a standard 19”
equipment rack.
Use a support bar to provide adequate support for the power
supply.
Desktop Use
The FAST-PS-1K5 & F1K5-DISS system can be used as desktop unit but every
precaution must be used to avoid touching the output connectors because of the high
energy source.
CAUTION
CAUTION
WARNING
NO
