Introduction
CT PCB Series User’s Manual
10
1.2
CT PCB Models and Versions
The
<
CT PCB series of current transducer has three different models that
differ for primary current rating; each model is available in two different output
versions – i.e. secondary current-output (standard) or secondary voltage-output (“V”
version).
The different models and versions of the CT PCB series are summarized in the
following table (
Table 1
):
Product Code
Model
Description
WCT13XAAAAAA
CT-13
13 A Primary Current
<
, PCB-mounting
WCT13XLPAAAA
CT-13-LP
13 A Primary Current
<
, Low Profile, PCB-
mounting
WCT26XAAAAAA
CT-26
26 A Primary Current
<
, PCB-mounting
WCT52XAAAAAA
CT-52
52 A Primary Current
<
, PCB-mounting
WCT13VXAAAAA
CT-13V
13 A Primary Current
<
, PCB-mounting,
Voltage-Output
WCT26VXAAAAA
CT-26V
26 A Primary Current
<
, PCB-mounting,
Voltage-Output
WCT52VXAAAAA
CT-52V
52 A Primary Current
<
, PCB-mounting,
Voltage-Output
Table 1:
CT-PCB series versions and models
On the rear side of the power supply unit are visible the air outlets for cooling,
output connection terminals, interlock and output status connector, three-phase inputs,
rail fuses and the analog output monitor coaxial connector.