CAE LucinaAR, User Manual, Page: 45 / 63

©2020 CAE 905K472552 v1.1 39
Using CAE LucinaAR
Power Off the HoloLens 2 and Simulator
You must power off the HoloLens 2 and simulator.
To power off the HoloLens 2:
a. Press and hold down the power button on the head band until the HoloLens 2 says,
“Goodbye.”
b. Plug the power supply into the HoloLens 2 and allow the unit to recharge.
To power off the simulator:
a. Stop the SCE and exit Müse.
b. Turn off the tablet.
c. Press the power button on the manikin to power down.