CAE Air1, User Manual, Page: 66 / 158

©2020 CAE 905K710052 v.1.1 61
Interface Overview
There are five tests included in the Self Test, each with its own sequence of screens:
1. Primary Alarm System
2. Backup Alarm System
3. Power Source Switch
4. Component Functional Check
5. Software Integrity Check
For each of the five tests, follow the onscreen instructions.
As each test is passed, a green checkmark appears beside the test name on the left side of the
screen. If a test fails, a red X will appear beside the test name instead.
The Self Test is determined to Pass only if all of these sub-tests are passed.
Primary Alarm System
The Primary Alarm System test verifies the functioning of the ventilator’s audible and visible alarms.
Follow the onscreen instructions:
Primary Alarm System Test - Start Screen