CAE Air1 User Manual Download Page 34 | Manualshive

Page: 34 / 158

CAE Air1 User Manual Download Page 34

©2020 CAE 905K710052 v.1.1

27

Introduction

I

NTRODUCTION

This user guide is part of a set of supporting documentation for the CAE Air1 ventilator. The set
includes the following documents furnished in either hardcopy or online formats:

• Unpacking Instructions

• Quick Reference Guide

• User Guide

• Service Manual

The CAE Air1 Mechanical Ventilator

The CAE Air1 ventilator is a mechanical ventilation system designed for continuous, invasive
ventilation for adult patients.

The ventilator utilizes gas intake from room air as well as a pressurized oxygen source. Its air-mixing
and pressure output features are managed electronically and controlled by dedicated computer
software. The air-mixing feature allows for control of the oxygen percentage in the air supply. Three
unique modes of operation are supported: Pressure Control, Volume Control and Pressure Support.

The CAE Air1 Mechanical Ventilator

«
...
32
33
34
35
36
...
»

Summary of Contents for Air1































































































































































Reviews:

No comments