CAE Air1 User Manual Download Page 25

Page: 25 / 158

Safety

CAE

Air1

Ventilator Warning Text Labels

The following labels contain text messages and symbols. The symbols are defined in the

Ventilator

Symbols and Definitions

table and the text details are provided here:

Warning Text Labels with Symbols

WARNING

Do Not Obstruct Air Intake, Thereby Interfering With Patient

Ventilation

AVERTISSEMENT

Ne Pas Obstruer L’Entrée D’Air, Ce Qui Interfère Avec La

Ventilation Du Patient

WARNING

Ensure Casters Are Locked Before Operating

AVERTISSEMENT

Vérifier Que Les Roullettes Sont Verrouillées Avant D’employer

AVERTISSEMENT

Risque d’électrocution. L’interrupteur de déconnexion

principal ne coupe pas la puissance de sortie du dispostif

d’alimentation sans interruption (ASI). Éteindre le dispostif

avan de procéder á l’entretien.

WARNING

Electric Shock Hazard. Main disconnect switch does not

remove UPS output power. Turn off UPS before servicing.

Summary of Contents for Air1































































































































































Search results

Summary of Contents for Air1

Reviews:

CAE Air1, User Manual, Page: 25 / 158

Search results

Summary of Contents for Air1

Reviews: