manualshive.com logo in svg

CAE Healthcare Vimedix Cardiac, User Manual

Share
Download
CAE Healthcare Vimedix Cardiac User Manual Download Page 55

Starting the Simulator

29

c. Click the 

Apply

 button to apply the configuration.

The Apply Buttons

A warning message appears if one of the monitors does not meet the 
1920x1080p resolution requirement.

The Resolution Warning Message

The warning message is intended for notification purposes only. An 
incorrect resolution will not affect the user’s ability to access the simulator.

Step 2: Perform Auto Update

To receive auto updates for the simulator, the simulator must be connected to the Internet using an 
Ethernet cable. The Auto Update screen indicates that the simulator connected to the network 
successfully. 

The Auto Update Screen

A progress bar appears, indicating the update status. Updates may take several hours to install, 
depending on the update size and Internet connection speed. Once an update is complete, the 
simulator will automatically restart.

The 

Apply

button

Summary of Contents for Vimedix Cardiac

































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands