CAE Healthcare Vimedix Cardiac User Manual Download Page 235

Page: 235 / 480

Using the Ob/Gyn Ultrasound Simulator

209

2. Uncheck the boxes in the left column to remove structures from the AR

display.

3. Uncheck the boxes in the right column to remove artifacts from the

Ultrasound display.

NOTE:

Some structures cannot be removed from the Ultrasound display.

These structures are denoted by a lock symbol.

4. Click the

Close

button to apply the changes and exit the Structures

Visibility window.

Selecting a Cross Section View

Using the

Cross Section View

button, users can select the desired cross section view from the available

options.

The Cross Section View Options

NOTE:

When using the expanded toolbar view, click the desired cross section button located in the

Cross Section View section of the Simulation panel.

The Cross Section View Section

The

Cross Section

View

button

The

Normal

button

The

Inverted

button

The

Both Sides

button

The

Normal

button

The

Inverted

button

The

Both Sides

button

Summary of Contents for Vimedix Cardiac
































































































































































































































































































































































































































































































Search results

Summary of Contents for Vimedix Cardiac

Reviews:

Brands by name

Popular brands

CAE Healthcare Vimedix Cardiac, User Manual

Search results

Summary of Contents for Vimedix Cardiac

Reviews:

Brands by name

Popular brands