CAE Healthcare Fidelis Lucina, User Manual

Page: 136 / 390

Using Müse
108
The Medication Monitor
The Medication Monitor tracks the infusion of medication administered for medications that affect
patient physiology. To activate the Medication Monitor, from the Run screen, click the Medication
Monitor button in the bottom, right portion of the screen.
The Medication Monitor Button
The Medication Monitor appears as a movable box on the Run screen.
The Medication Monitor
The normalized effector site concentration is shown next to each medication listing.
The Reset button is used to clear a medication from the physiological model and the Medication
Monitor.
To close the Medication Monitor, press the Close button in the upper right corner of the medication
Monitor window.
Resetting a Medication
To reset a medication from the Medication Monitor, click the Reset button on the Medication Monitor.
The Reset Medication dialog box appears, asking you to confirm that you wish to reset the medication.
The Reset Medication Dialog Box
The medication is cleared from the model and from the Medication Monitor.
With continuous infusions, the amount infused goes back to zero, but the infusion continues. To stop the
infusion, you must select the medication from the medication library and set the infusion rate to zero.
Medication
name
The Reset
button
The Close
button
Normalized effector
site concentration
The Reset button