Cadillac XTS 2019 Owner'S Manual Download Page 55

Page: 55 / 319

Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-12163105) - 2019 -

crc - 5/30/18

SEATS AND RESTRAINTS

Press Rearward (3) to make
rearward adjustments of the
selected feature.

Press Down (4) to make downward
adjustments of the selected
feature.

Press Forward (5) to make forward
adjustments of the selected
feature.

Base Seat Adjustment

{

Warning

The power seats will work with the
ignition off. Children could operate
the power seats and be injured.
Never leave children alone in the
vehicle.

To adjust the seat:

Move the seat forward or rearward
by sliding the control forward or
rearward.

Raise or lower the front part of the
seat cushion by moving the front
of the control up or down.

Raise or lower the seat by moving
the rear of the control up or down.

Lumbar Adjustment

Lumbar and Bolster Support

To adjust lumbar support:

Press and hold the control forward
to increase or rearward to decrease
upper and lower lumbar support
at the same time.

Press and hold the control up to
increase upper lumbar support
and decrease lower lumbar
support.

Summary of Contents for XTS 2019
































































































































































































































































































































Search results

Summary of Contents for XTS 2019

Reviews:

Related manuals for XTS 2019

Brands by name

Popular brands

Cadillac XTS 2019, Owner'S Manual

Search results

Summary of Contents for XTS 2019

Reviews:

Related manuals for XTS 2019

Brands by name

Popular brands