Cadillac XTS 2019 Owner'S Manual Download | Manualshive

Page: 292 / 319

background image

Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-12163105) - 2019 -

crc - 5/30/18

SERVICE AND MAINTENANCE

291

Proper vehicle maintenance helps to
keep the vehicle in good working
condition, improves fuel economy, and
reduces vehicle emissions.

Because of the way people use
vehicles, maintenance needs vary.
There may need to be more frequent
checks and services. The Additional
Required Services - Normal are for
vehicles that:

.

Carry passengers and cargo within
recommended limits on the Tire
and Loading Information label. See

Vehicle Load Limits

.

.

Are driven on reasonable road
surfaces within legal driving limits.

.

Use the recommended fuel.
See

Recommended Fuel (LFX 3.6L

or

Fuel (LF3 3.6L V6 Twin Turbo
Engine)

Refer to the information in the
Maintenance Schedule Additional
Required Services - Normal chart.

The Additional Required Services -
Severe are for vehicles that are:

.

Mainly driven in heavy city traffic
in hot weather.

.

Mainly driven in hilly or
mountainous terrain.

.

Frequently towing a trailer.

.

Used for high speed or competitive
driving.

.

Used for taxi, police, or delivery
service.

Refer to the information in the
Maintenance Schedule Additional
Required Services - Severe chart.

{

Warning

Performing maintenance work can
be dangerous and can cause serious
injury. Perform maintenance work
only if the required information,
proper tools, and equipment are
available. If they are not, see your
dealer to have a trained technician
do the work. See

Doing Your Own

.

Maintenance Schedule

Owner Checks and Services

At Each Fuel Stop

.

Check the engine oil level. See

Once a Month

.

Check the tire inflation pressures.
See

Tire Pressure

.

.

Inspect the tires for wear. See

.

.

Check the windshield washer fluid
level. See

Engine Oil Change

Change the engine oil and filter when
the CHANGE ENGINE OIL SOON
message displays, 12 000 km/7,500 mi,
or at one year, whichever comes first.
If driven under the best conditions,
the engine oil life system may not
indicate the need for vehicle service
for up to a year. The engine oil and
filter must be changed at least once a
year and the oil life system must be
reset. Your trained dealer technician
can perform this work. If the engine

«
...
290
291
292
293
294
...
»

Summary of Contents for XTS 2019
































































































































































































































































































































Reviews:

No comments

Related manuals for XTS 2019

Brand: Daihatsu Pages: 485

Brand: Vauxhall Pages: 199

Brand: Cargo Floor Pages: 16

Brand: Toyota Pages: 371

Brand: hc-cargo Pages: 60

2014 Grand Cherokee SRT8

Brand: Jeep Pages: 596

Brand: Skoda Pages: 4

Easy Air Auto Screen

Brand: Wagan Pages: 8

Brand: Blue Ox Pages: 5

Brand: Menabo Pages: 8

Brand: Kolpin Pages: 6

Brand: Painless Performance Pages: 16

Brand: EUFAB Pages: 8

Brand: Kleinn Air Horns Pages: 33

Brand: Cadillac Pages: 339

Brand: Adaptiv Mini Pages: 4

Brand: Kargo Master Pages: 14

BreadCrumb DX2 Series

Brand: Rajant Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands