
Cadillac User Experience (GMNA-Localizing-U.S./Canada-11434397) - 2018 -
crc - 5/2/17
REAR SEAT INFOTAINMENT
27
Rear Seat Infotainment
Rear Seat Infotainment
(RSI) System
If equipped, the system includes a
Blu-ray/DVD/CD player, two USB
ports, HDMI/MHL input, wireless
headphones, and a remote control.
The remote control is used to select
the same or a different source for each
screen from the rear seats.
Video can be viewed from the front by
touching the Video screen icon, if the
vehicle is in P (Park). Audio will be
heard over the speakers. If another
screen icon is selected, the video on
the rear screen will continue to play
but the audio on the speakers will
change to the source selected.
To resume play of the video where it
left off, Pseudo Resume must be on.
See
“
Player Setup BD/DVD" later in
this section.
The RSI system may not operate
properly until the temperature is
above
−
20 °C (
−
4 °F) and below 55 °C
(131 °F).
System Operation
The video screens are overhead in the
second or third row (if equipped).
To use:
1. Press the release button in front
of the overhead screen. Do not
pull on the sides of the screen.
2. Move the screen to the viewing
position. Remove the remote
from the storage location to use.
Caution
When storing the remote, place it in
the storage area with the buttons
facing toward you or damage to the
screen could occur.
3. Opening a screen will turn the
system on. If the screens are
open with the system off, press
the power button on the remote
to turn the system on.