Cadillac STS 2007, Manual

Page: 86 / 162

3. Press the CONFIG hard key.
4. Adjust your settings for the driver’s seat, the
outside mirrors, and the steering column to a
comfortable driving position or exit position.
5. Push and hold either the Driver 1 or Driver 2
screen buttons to store the driving positions.
Push and hold the Exit screen button to
store the exit position.
Two beeps will sound to confirm that the
driver or exit position is stored.
The memory settings are now programmed.
Any changes that are made to the Head-Up
Display (HUD), navigation system, and climate
controls while driving will be automatically
stored when then ignition is turned off.
Recall Memory Settings
To recall memory settings, do the following:
1. Be sure the ignition is either on, in accessory
mode, or in RAP. The vehicle must be
stopped and/or the shift lever must be in
PARK (P).
2. Press the CONFIG hard key.
3. Push and release either the Driver 1 or
Driver 2 screen buttons to recall the
driving positions. Push and release the Exit
screen button to recall the exit position.
If the vehicle is in PARK (P), a beep will sound
and your previously saved driving position
or exit position will then be recalled. If
the vehicle is not in PARK (P), three beeps
will sound and your previously saved
driving position or exit position will not be
recalled.
A memory recall can be stopped by pressing
any memory seat or mirror position button.
If you would like the stored driving positions to
be recalled when unlocking your vehicle
with the keyless access transmitter or when
starting your vehicle, see “Occupant Position”
under
Personalization on page 138 for
more information.
86