Cadillac SRX 2012 Owner'S Manual Download Page 30

Page: 30 / 512

Black plate (24,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

1-24

In Brief

The oil life system can also be reset
as follows:
1. Turn the ignition on with the

engine off.

2. Fully press and release the

accelerator pedal three times
within five seconds.
If the CHANGE ENGINE OIL
SOON message is not on, the
system is reset.

See

Engine Oil Life System on

page 10

�

Fuel E85 (85% Ethanol)

Vehicles that have a FlexFuel badge
and a yellow fuel cap can use either
unleaded gasoline or ethanol fuel
containing up to 85% ethanol (E85).
See

Fuel E85 (85% Ethanol) on

page 9

�

. For all other vehicles,

use only the unleaded gasoline
described under

Recommended

Fuel on page 9

�

Driving for Better Fuel

Economy

Driving habits can affect fuel
mileage. Here are some driving
tips to get the best fuel economy
possible.

Avoid fast starts and accelerate
smoothly.

Brake gradually and avoid
abrupt stops.

Avoid idling the engine for long
periods of time.

When road and weather
conditions are appropriate,
use cruise control.

Always follow posted speed
limits or drive more slowly when
conditions require.

Keep vehicle tires properly
inflated.

Combine several trips into a
single trip.

Replace the vehicle's tires with
the same TPC Spec number
molded into the tire's sidewall
near the size.

Follow recommended scheduled
maintenance.

Roadside Service

U.S.:

1-800-224-1400

Canada:

1-800-882-1112

TTY Users (U.S. only):

1-888-889-2438

Mexico:

01-800-466-0805

As the owner of a new Cadillac,
you are automatically enrolled in
the Roadside Service program.
See

Roadside Service (U.S. and

Canada) on page 13

�

Roadside

Service (Mexico) on page 13

�

Summary of Contents for SRX 2012

































































































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands

Cadillac SRX 2012, Owner'S Manual

Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands