Cadillac SRX 2012 Owner'S Manual Download Page 283

Page: 283 / 512

Black plate (5,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

Driving and Operating

9-5

Curve Tips

Take curves at a reasonable
speed.

Reduce speed before entering a
curve.

Maintain a reasonable steady
speed through the curve.

Wait until the vehicle is out of
the curve before accelerating
gently into the straightaway.

Steering in Emergencies

There are some situations when
steering around a problem may
be more effective than braking.

Holding both sides of the
steering wheel allows you
to turn 180 degrees without
removing a hand.

The Antilock Brake System
(ABS) allows steering while
braking.

Off-Road Recovery

The vehicle's right wheels can
drop off the edge of a road onto
the shoulder while driving.
Follow these tips:
1. Ease off the accelerator and

then, if there is nothing in the
way, steer the vehicle so that
it straddles the edge of the
pavement.

2. Turn the steering wheel about

one-eighth of a turn, until the
right front tire contacts the
pavement edge.

3. Then turn the steering wheel to

go straight down the roadway.

Loss of Control

Skidding

There are three types of skids that
correspond to the vehicle's three
control systems:

Braking Skid

—

wheels are not

rolling.

Steering or Cornering
Skid

—

too much speed or

steering in a curve causes tires
to slip and lose cornering force.

Acceleration Skid

—

too much

throttle causes the driving
wheels to spin.

Summary of Contents for SRX 2012

































































































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands

Cadillac SRX 2012, Owner'S Manual

Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands