Cadillac GMC Yukon Denali 2005, Owner'S Manual

Page: 14 / 456

Rear Seats
Rear Seat Operation
Entering or Exiting the Third Row
Seats
Yukon Denali: To enter the third row seat, you must
fold the second row seat down following the instructions
later in this section. See “Folding the Seatback” under
60/40 Split Bench Seat on page 1-10. To exit the
third row seat with no assistance, do the following:
1. Reach over the
second row seat and
pull up on the strap
loop located in
the center of the seat
where the seatback
and the seat cushion
meet. Then pull
the seat cushion up
and push it forward.
2. Next, push the seatback forward until it is flat with
the floor.
Be sure to return the seat to the passenger position
when finished. Pull forward and push rearward on the
seat to make sure it is locked in place.
Yukon XL Denali: The passenger’s side of the second
row 60/40 or rear bucket seat has an easy entry/exit
feature. This makes it easy to get in and out of the
third row seat.
To operate the easy entry seat, do the following:
1. Lift the release lever on the back of the seat.
2. Tilt the seatback toward the front of the vehicle and
the seat will release.
1-8