Cadillac Escalade EXT 2013 Owner'S Manual Download | Manualshive

Page: 347 / 476

background image

Black plate (19,1)

Cadillac Escalade EXT Owner Manual - 2013 - CRC - 4/5/12

Vehicle Care

10-19

.

Tows a trailer. See

Towing on page 9

If the ENGINE OVERHEATED
STOP ENGINE or the ENGINE
OVERHEATED IDLE ENGINE
message appears with no sign of
steam, try this for a minute or so:

If the overheat warning is displayed
with no sign of steam:

1. Turn the air conditioning off.

2. Turn the heater on to the highest

temperature and to the highest
fan speed. Open the windows as
necessary.

3. In heavy traffic, let the engine

idle in N (Neutral) while stopped.
If it is safe to do so, pull off the
road, shift to P (Park) or
N (Neutral) and let the
engine idle.

If the temperature overheat gauge is
no longer in the overheat zone or an
overheat warning no longer
displays, the vehicle can be driven.
Continue to drive the vehicle slowly
for about 10 minutes. Keep a safe

vehicle distance from the vehicle in
front. If the warning does not come
back on, continue to drive normally.

If the warning continues, pull over,
stop, and park the vehicle
right away.

If there is no sign of steam, idle the
engine for five minutes while
parked. If the warning is still
displayed, turn off the engine until it
cools down. Also, see

“

Overheated

Engine Protection Operating Mode

”

later in this section.

Overheated Engine
Protection
Operating Mode

If an overheated engine condition
exists and the ENGINE POWER IS
REDUCED message is displayed,
an overheat protection mode which
alternates firing groups of cylinders
helps prevent engine damage. In
this mode, a loss in power and
engine performance will be noticed.
This operating mode allows the

vehicle to be driven to a safe place
in an emergency. Driving extended
distances and/or towing a trailer in
the overheat protection mode
should be avoided.

Notice:

After driving in the

overheated engine protection
operating mode, to avoid engine
damage, allow the engine to cool
before attempting any repair. The
engine oil will be severely
degraded. Repair the cause of
coolant loss, change the oil and
reset the oil life system. See

Engine Oil on page 10

.

Engine Fan

The vehicle has electric cooling
fans. The fans spinning at low
speed during most everyday driving
might be heard. The fans can turn
off if no cooling is required. Under
heavy vehicle loading, trailer towing,
and/or high outside temperatures,
or if operating the air conditioning
system, the fans can change to high
speed and an increase in fan noise

«
...
345
346
347
348
349
...
»

Summary of Contents for Escalade EXT 2013





























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT 2013

Brand: Kargo Master Pages: 6

AUDI 4G HIGHEND

Brand: KAP Pages: 20

PRIME DESIGN VRI3-E-PM11

Brand: Safe Fleet Pages: 12

Brand: Phonocar Pages: 6

Brand: ECS Electronics Pages: 16

2003 Silhouette

Brand: Oldsmobile Pages: 466

Brand: Huf Pages: 6

MagicSpeed MS900

Brand: Waeco Pages: 120

Brand: Calix Pages: 4

Sprinter Bed System DIY

Brand: FVC Pages: 8

Brand: Black Horse Off Road Pages: 3

Brand: Velleman Pages: 17

Brand: Menabo Pages: 4

Brand: Whispbar Pages: 15

V2 Two-Bike Carrier

Brand: LetsGoAero Pages: 2

Tri-Mount 34269

Brand: PowerMadd Pages: 2

Brand: DIGITAL DELAY Pages: 11

Brand: Genesis Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands