Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
15567102) - 2022 - CRC - 8/16/21
SEATS AND RESTRAINTS
45
The massage feature will turn off after
approximately 20 minutes. Press the
massage On/Off Control (6) to restart
the massage feature.
Memory Seats
Overview
If equipped, the memory seat feature
allows drivers to save their unique
driving positions and a shared exit
position. See
“
Saving Seating
Positions
”
later in this section. The
saved positions can be recalled
manually by all drivers. See
“
Manually
Recalling Seating Positions
”
later in
this section. Drivers with remote key
1 and 2 can also recall them
automatically. See
“
Auto Seat Entry
Memory Recall
”
or
“
Auto Seat Exit
Memory Recall
”
later in this section.
To enable automatic recalls, turn on
Seat Entry Memory and/or Seat Exit
Memory. See
“
Enable Automatic
Recalls
”
under
“
Vehicle
Personalization Settings
”
later in this
section. The memory recalls may be
cancelled at any time during the
recall. See
“
Cancel Memory Seating
Recalls
”
later in this section.
Identifying Driver Number
The vehicle identifies the current
driver by their remote key number 1
–
8. The current remote key number
may be identified by Driver
Information Center (DIC) welcome
message,
“
You are driver x for memory
recalls,
”
This message is displayed the
first few times the vehicle is turned on
when a different remote key is used.
For Seat Entry Memory to work
properly, save positions to the 1 or
2 memory button matching the driver
number of this welcome message. To
aid in identifying remote key IDs, it is
recommended to only carry one
remote key when entering the vehicle.
Perform the following if the welcome
message is not displayed:
1. Move all remote keys away from
the vehicle.
2. Start the vehicle with another
remote key. A DIC welcome
message should display indicating
the driver number of the other
remote key. Turn the vehicle off
and remove the other remote key
from the vehicle.
3. Start the vehicle with the initial
remote key. The DIC welcome
message should display the driver
number of the initial remote key.
Saving Seating Positions
Read these instructions completely
before saving memory positions.
To save preferred driving positions to
1 and 2:
1. Turn the vehicle on or to ACC/
ACCESSORY. A DIC welcome
message may indicate the driver
number of the current remote key.
See
“
Identifying Driver Number
”
previously in this section.
