Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -
2018 - crc - 7/14/17
152
INSTRUMENTS AND CONTROLS
It cannot be reset accurately until the
next oil change. See
.
Oil Pressure :
Shows the engine oil
pressure in kPa (kilopascals)
or psi (pounds per square inch).
Engine Hours :
Shows the total
number of hours the engine has run.
Transmission Fluid Temperature :
Shows the temperature of the
automatic transmission fluid in either
degrees Celsius (°C) or degrees
Fahrenheit (°F).
Tyre Pressure :
Shows the
approximate pressures of all four
tyres. Tyre pressure is displayed in
either kilopascal (kPa) or in pounds
per square inch (psi). If the pressure is
low, the value for that tyre is shown in
amber.
See
and
Blank Page :
Allows for no
information to be displayed in the
cluster info display areas.
Head-Up Display (HUD)
{
Warning
If the HUD image is too bright or
too high in your field of view, it
may take you more time to see
things you need to see when it is
dark outside. Be sure to keep the
HUD image dim and placed low in
your field of view.
If equipped with HUD, some
information concerning the operation
of the vehicle is projected onto the
windscreen. The image is projected
through the HUD lens on top of the
instrument panel. The information
appears as an image focused out
toward the front of the vehicle.
Caution
If you try to use the HUD image as
a parking aid, you may misjudge
the distance and damage your
vehicle. Do not use the HUD image
as a parking aid.
The HUD information can be
displayed in various languages. The
speedometer reading and other
numerical values can be displayed in
either English or metric units.
The language selection is changed
through the radio and the units of
measurement is changed through the
instrument cluster. See
and "Cluster
Settings Menu" under
HUD Display on the Vehicle
Windscreen
