Cadillac CT62018 Owner'S Manual Download Page 77

Page: 77 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

SEATS AND RESTRAINTS

4. Press the massage control button

(8) to recall the last massage
type and intensity.

Easy Exit

Platinum Seat

If equipped, press

to tilt the front of

the seat fully downward and to move
the entire seat fully rearward. The seat
will also move to this position when
the rear door is opened.

Lumbar Adjustment

If a child restraint is installed, see

Rear Seats

Platinum Rear Seat

If equipped, the armrest may have
controls for lumbar and upper back
support.

When the center selection control (1)
is toggled, a panel display will be
activated from the driver or passenger
seatback.

To adjust lumbar support, if equipped:

1. Toggle the center selection

control (1) to view adjustable
seat options on the display.

2. Select lumbar support.

3. Press and hold the control

forward (5) to increase or
rearward (3) to decrease support.

4. Press and hold the control

upward (2) to raise or
downward (4) to lower the height
of the support.

To adjust upper back support,
if equipped:

1. Toggle the center selection

control (1) to view adjustable
seat options on the display.

2. Select upper back support.

3. Press and hold the control

forward (5) to increase or
rearward (3) to decrease support.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 77 / 445

Search results

Summary of Contents for CT62018

Reviews: