Cadillac CT62018 Owner'S Manual Download Page 330

Page: 330 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

VEHICLE CARE

329

Caution

Do not apply tape or hang any
objects from gas struts. Also do not
push down or pull on gas struts.
This may cause damage to the
vehicle.

See

Maintenance Schedule

390

Hood

Trunk

Liftgate

Headlamp Aiming

Headlamp aim has been preset and
should need no further adjustment.

If the vehicle is damaged in a crash,
the headlamp aim may be affected.
If adjustment to the headlamps is
necessary, see your dealer.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 330 / 445

Search results

Summary of Contents for CT62018

Reviews: