Cadillac CT62018 Owner'S Manual Download Page 280

Page: 280 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

DRIVING AND OPERATING

279

Charging Status

Indicator

Sound

Action/Reason

None

Repeated audible beeps
To disable this feature, see

“

Charge Power Loss

Alert

”

Vehicle Personalization

170

To stop this alert, do one of the following:

Unplug the charge cord.

Press

on the RKE transmitter.

Press and hold

on the RKE transmitter,

then press again to stop the panic alarm.

Press the horn pad.

Electricity has been interrupted before
charging was complete. Repeated beeps will
stop if power is restored within 90 seconds.

None

Three audible beeps

Charge port door is open.

Charge Cord
(PLUG-IN Only)

IMPORTANT SAFETY
INSTRUCTIONS

This symbol means Warning: Risk of
electrical shock.

See

Radio Frequency Statement

417

A portable charge cord used to charge
the vehicle high voltage battery is
stored in the left storage compartment
in the rear cargo area.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 280 / 445

Search results

Summary of Contents for CT62018

Reviews: