Cadillac CT62018 Owner'S Manual Download Page 198

Page: 198 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

CLIMATE CONTROLS

197

Automatic Climate Control System (Quad Zone -
Gasoline Only)

The climate control buttons on the center stack and on the climate control
display are used to adjust the heating, cooling, and ventilation.

Center Stack Climate Controls

1. Driver and Passenger

Temperature Controls

2. Fan Control

3. Driver and Passenger Heated and

Ventilated Seats (If Equipped)

4. Rear Window Defogger

5. Defrost

6. OFF (Fan)

7. Recirculation

8. AUTO (Automatic Operation)

Climate Control Display

1. Outside Temperature Display

2. Driver and Passenger

Temperature Controls

3. Fan Control

4. A/C (Air Conditioning)

5. Climate Control Selection

(Application Tray Button)

6. SYNC (Synchronized

Temperature)

7. Driver and Passenger Air

Delivery Mode Controls

8. Defog

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 198 / 445

Search results

Summary of Contents for CT62018

Reviews: