Cadillac CT62018 Owner'S Manual Download Page 152

Page: 152 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

INSTRUMENTS AND CONTROLS

151

Vehicle Ready Light
(PLUG-IN Only)

The vehicle ready light comes on
whenever the vehicle is ready to be
driven.

High-Beam On Light

This light comes on when the
high-beam headlamps are in use. See

Headlamp High/Low-Beam Changer

185

IntelliBeam

Light

This light comes on when the
IntelliBeam system, if equipped, is
enabled. See

Exterior Lamp Controls

183

Lamps On Reminder

This light comes on when the exterior
lamps are in use. See

Exterior Lamp

Controls

183

Cruise Control Light

The cruise control light is white when
the cruise control is on and ready, and
turns green when the cruise control is
set and active.

See

Cruise Control

242

Adaptive Cruise Control Light

This light is white when the Adaptive
Cruise Control (ACC, if equipped) is on
and ready, and turns green when the
ACC is set and active. See

Adaptive

Cruise Control

245

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 152 / 445

Search results

Summary of Contents for CT62018

Reviews: