Cadillac CT62018 Owner'S Manual Download Page 136

Page: 136 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

INSTRUMENTS AND CONTROLS

135

Battery Gauge (High
Voltage)

This gauge shows the high voltage
battery charge level.

The arrow next to the battery symbol
points to the side of the vehicle the
charge port is on.

See

Plug-In Charging (PLUG-IN Only)

274

Fuel Gauge

Base Level Standard Theme

Uplevel Balanced Configuration

When the ignition is on, the fuel
gauge indicates about how much fuel
is left in the tank.

There is an arrow near the fuel gauge
pointing to the side of the vehicle the
fuel door is on.

When the indicator nears empty, the
low fuel light comes on. There still is
a little fuel left, but the vehicle should
be refueled soon.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 136 / 445

Search results

Summary of Contents for CT62018

Reviews: