CT6 Cadillac User Experience (GMNA-Localizing-U.S./Canada-11292518) -
2018 - crc - 3/1/17
78
VOICE RECOGNITION
Voice Recognition
Voice recognition allows for
hands-free operation within the
navigation, audio, phone, and weather
applications. This feature can be
started by pressing
g
on the steering
wheel or
g
on the infotainment
display.
However, not all features within these
areas are supported by voice
commands. Generally, only complex
tasks that require multiple manual
interactions to complete are
supported by voice commands.
For example, tasks that take more
than one or a two touches such as
selecting a song or artist to play from
a media device would be supported by
voice commands. Other tasks, like
adjusting the volume or seeking up or
down, are audio features that are
easily performed by pressing one or
two controls, and are not supported
by voice commands.
In general there are flexible ways to
speak commands for completing the
tasks. Most of them, except
destination entry and voice keypad,
can be completed in a single
command. If the task takes more than
one command to complete, the first
command should be to indicate the
kind of task to be performed, like
“
Navigation Destination Entry.
”
The
system replies with prompts that lead
you through a dialog to enter the
necessary information. For example,
if a destination for route guidance is
needed, say
“
Navigation
”
or
“
Destination Entry.
”
If your language supports it, try
stating a One-Shot command, such as
“
Navigate to Address <number, street,
city, state>.
”
This type of destination
entry command is supported in some
languages. Another example of a
One-Shot Destination Entry command
is,
“
Navigate to Place Of Interest
–
Hotels.
”
If these commands do not
work, try saying,
“
Navigate to Place of
Interest
”
or
“
Navigate to Address
”
and
the system will do the rest.
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active. See
“
Retained Accessory Power (RAP)
”
in
the owner
’
s manual.
Using Voice Recognition
Voice recognition becomes available
once the system has been initialized.
This begins when the ignition is
turned on. Initialization may take a
few moments.
1. Press
g
on the steering wheel
control to activate voice
recognition, or touch
g
on the
infotainment display.
.
If voice recognition is started
from the steering wheel
control, the instrument
cluster displays the selections
and visual dialog content.
.
If voice recognition is started
from the infotainment
display, the selections and
visual dialog content are
displayed on both the
infotainment display and the
instrument cluster display.
2. The audio system mutes and the
system plays a prompt followed
by a beep.
