CT6 Cadillac User Experience (GMNA-Localizing-U.S./Canada-11292518) -
2018 - crc - 3/1/17
46
REAR SEAT INFOTAINMENT
Replacement
”
following. Objects
blocking the line of sight could also
affect the function of the remote
control.
Caution
Storing the remote controls in a hot
area or in direct sunlight can
damage them, and the repairs
would not be covered by the vehicle
warranty. Storage in extreme cold
can weaken the batteries. Keep the
remote controls stored in a cool,
dry place.
Battery Replacement
To change the remote control
batteries:
1. Press the indented area on the
back of the remote and slide the
cover off.
2. Insert the tip of a flat-head
screwdriver into the slot marked
with arrows to eject the batteries.
3. Replace the two coin cell
batteries.
4. Replace the battery cover.
Remove the batteries from the remote
control if it will not be used for an
extended period of time.
Video Voice Over
If equipped, the RSI system has a
Video Voice Over feature to benefit
the visually and hearing impaired.
When activated, the RSI will read
aloud menu titles, menu listings,
pop-ups, alerts, and file titles from
audio and video media. Titles with
gibberish, special characters,
or foreign text may not be read aloud.
Use one of the following to turn Video
Voice Over on or off:
.
Select Video Voice Over from the
Front Display menu.
.
Select Video Voice Over from the
RSI menu.
.
Press and hold the Remote Control
Menu and Play/Pause buttons for
five seconds.
Video Voice Over will remain active
over ignition cycles until it is
turned off.
RSI Troubleshooting
No power :
The ignition might not be
in ON/RUN or ACC/ACCESSORY.
The picture does not fill the screen.
There are black borders on the top
and bottom or on both sides or it
looks stretched out :
Press
y
(Menu)
on the remote control to change the
display mode setting.
In auxiliary mode, the picture
moves or scrolls :
Check the auxiliary
input connections at both devices.
The remote control does not work :
Check to make sure the remote
control is programmed to the correct
screen. Make sure there is no
obstruction between the remote
control and the transmitter window
and check the batteries to make sure
they are not dead or installed
incorrectly.
There is no sound from the
headphones with the indicator light
on :
If the batteries are good, make
sure the headphones are programmed
to the correct screen and on the
correct channel for the screen being
viewed.
